Function
-
Automatic paper feeder and overlapping syste
The auto feeder with the pre-stacking and non-stop paper feeding function to ensure
the
lamination
continuous and save time, so as to increase the productivity. With servo drive over
overlapping
system,The overlapping precision: ≤±2mm.
The auto feeder with the limitation of maximum and minimum paper, and the maximum paper
and
minimum paper length ratio is limited in 3:1
-
-
Powder cleaner unit (dust removal): optional
The powder cleaning unit is dry type cleaning, combined by dust brushing absorbing and
thermal
pressing roller powder removing.
The powder cleaning should process after the paper finished overlapping, the conveying belt
and
feeding system should make sure straight and stable moving during
-
-
Lamination system
Combined by gluing unit, drying unit and compress laminating unit. Gluing unit evenly
gluing, adopt chrome-plate roller and doctor blade for gluing, gluing precision ≤
0.008mm.
The drying unit adopt big diameter thermal heating drum (diameterΦ550mm), temperature
control
within 80℃, heavy hot air circulating, so can achieve the fast drying purpose, at the same
time can
assure the film not stretch and break.
The heating steel roller adopt oil heating (inner heat), diameter Φ380mm. The Rubber pressing
roller hydraulic cylinder inner diameter 63mm, max pressure can reach 10ton, so can assure
the
high speed lamination requirement.
Rubber pressing roller lift up and down with automatic control device, convenient control the
pressure and more easy operation.
-
-
Film unwinder with Circular cutter
If the width of film is bigger than the sheet, you can use the film cutter to cut the edge.
Pneumatic shaft with magnetic brake tension control
The powder cleaning should process after the paper finished overlapping, the conveying belt
and
feeding system should make sure straight and stable moving during
Also can with differential slip shaft and straight rubber roller for
multi roll lamination (option)
-
-
Cutting system (separating and pulling device)
The paper separating device adopt blade disc rotary cutting, can assure paper which above
105gsm
can be effectively cut. The cutting system adopt frequency conversion speed control so can
synchronously working with main lamination syste
-
-
Fying knife cutting system
It also equipped with chain knife flying cutting device which focus on the PET, PVC film
separating
The MPET materials is hardness and not easy to tear it up. After passes through the
laminating
cutting section, you can using this system to cut it off immediately. The finished products
will deliver
to stacker Automatically.
-
-
Anti curling system
The thin paper anti bending device can slightly adjust the thin paper curling when
separating.
-
Anti curling system
It with non-stop collecting function.
-
-
Control system
The whole lamination system with computer touch screen, simple and stable operating.
Touch screen can be movable type (optional)
-
-
Movable lifter
Some of the film roll is very heavy, operator can using the movable lifter to lift the film
roll on the
pneumatic shaft.
